CRUISE Name : OCE09-2 No : GDP09-??

---

CRUISE PERIOD start : 18 march 2009 to end : 18 march 2009
PORT OF DEPARTURE Ancona (ITALY)
PORT OF RETURN Ancona (ITALY)

enter the full name and international radio call sign of the ship from which the data were collected, and indicate the type of ship, for example: research ship, ship of opportunity, naval survey, etc.
SHIP Name : DALLAPORTA Call Sign : IYVQ Type of ship : trawl research vessel (35 m.)

enter name and address of the laboratory responsible for coordinanting the scientific planning of the cruise
RESPONSIBLE LABORATORY Name : CNR-ISMAR-AN
Address : Largo Fiera della Pesca, 2 Ancona, 60125 Country : ITALY

enter name and address of the person(s) in charge of the scientific work (chief of mission) during the cruise
CHIEF SCIENTIST(S) Name : Antonello Sala CNR-ISMAR-AN

enter sufficient information about the purpose and nature of the cruise so as to provide the context in which the report data were collected
OBJECTIVES AND BRIEF NARRATIVE OF CRUISE
This was an unscheduled cruise to try:
the new dynamometer sensor of propeller axis
the new ECDIS (navigation program) installed on the ship
to find the CTD lost at "Calipso" platform by the new Side Scan Sonar.
The cruise started at 12:00 and ended at 19:00.
The test about the dynamometer was OK as well as the ECDIS
The find of the CTD was doubtfull

The scientific crew was: Sala, Lucchetti and De Carlo of technology unit,
Paschini and Penna of oceanography one.

(IF APPLICABLE) if the cruise is designated as part of a larger scale cooperative project (or expedition), then enter the name of the project and of organisation responsible for co-ordinanting the project.
PROJECT name : ENI Coordinanting body : CNR-ISMAR-AN

Enter the name and address of the Principal Investigators responsible for the data collected on the cruise and who may be contacted for further information about the data.
The letter assigned below against each PI is used on next tables, under the column heading 'PI', to identify the data sets for which he/she is responsible.
PRINCIPAL INVESTIGATORS

	name	body	address	country	e-mail
A	Antonello Sala	CNR-ISMAR-AN	Largo Fiera della Pesca,2 60125 Ancona	ITALY	a.sala@ismar.cnr.it
B	Elio Paschini	as above			e.paschini@ismar.cnr.it

This section should be used for reporting mooring, bottom mounted gear and drifting systems (both surface and deep) deployed and/or recovered during the cruise.
Separate entries should be made for each location (only deployement positions need be given for drifting systems). This section may also be used to report data collected at fixed locations which are returned to routinely in order to construct 'long time series'.
MOORINGS, BOTTOM MOUNTED GEAR AND DRIFTING SYSTEMS

PI	Latitude	Longitude	TYPE	DESCRIPTION

Separate entries should be made for each distinct amd coherent set of measurements of samples. Different modes of data collection (e.g. vertical profiles as opposed to underway measurement) should be clearly distinguished,as shouldmeasurements/sampling techniques that imply distinctly different accuracy's or spatial/temporalresolution. Thus, for example, separate entries would be created for i) XBT drops, ii) water bottle stations, iii) CTD casts, iv) towed CTD, v) towed undulating CTD profiler, vi) surface water intake measurements, etc.
Each data set entry should start on a new line - it's description may extend over several lines if necessary.
SUMMARY OF MEASUREMENTS AND SAMPLES TAKEN

PI	NO	UNITS	TYPE	DESCRIPTION
A	4	Km	G24	Side Scan Sonar Towfish DE340 at 30m from bottom
A	1	file	G64	Gear research dynamometer (power and torque sensor)
B	1	file(s)	D90	cruise track Navigation program (ECDIS) TRANSAS