CRUISE SUMMARY REPORT


CRUISE Name : ENI07-5 No : GDP07-??

CRUISE PERIOD start : 03 July 2007 to end : 06 July 2007
PORT OF DEPARTURE Ancona (ITALY)
PORT OF RETURN Ancona (ITALY)

enter the full name and international radio call sign of the ship from which the data were collected, and indicate the type of ship, for example: research ship, ship of opportunity, naval survey, etc.
SHIP Name : DALLAPORTA Call Sign : IYVQ Type of ship : trawl research vessel (35 m.)

enter name and address of the laboratory responsible for coordinanting the scientific planning of the cruise
RESPONSIBLE LABORATORY Name : CNR-ISMAR-AN Address : Largo Fiera della Pesca, 2 Ancona, 60125 Country : ITALY

enter name and address of the person(s) in charge of the scientific work (chief of mission) during the cruise
CHIEF SCIENTIST(S) Name : Pierluigi Penna CNR-ISMAR-AN

enter sufficient information about the purpose and nature of the cruise so as to provide the context in which the report data were collected
OBJECTIVES AND BRIEF NARRATIVE OF CRUISE
Fiveth monitoring cruise of ENI methane extraction site: CLARA-est, TEA and NAIDE
(8 CTD stations with 32 samples each platform).
Unsuccefull recovery of one mooring with Aanderaa RCM7 and acoustic releaser close to TEA platform.
Also 4 CTD stations of LTER Project were carried out in Senigallia Transect
Water samples for Winkler analisys on board.
The cruise was divided into two legs by metereological condition.

During the first leg (03 july) the two Clara platforms were visited: 8 CTD stations with 32 water samples.
The acoustic releaser check on Clara-est was OK instead Clara-nord did not reply.
On Clara-est external stations a school of dolphins was around the ship.
In the second leg (5-6 july) the four LTER CTD stations (13 water samples) were done first,
then the ship reached TEA platform.
The acoustic realeser replyes but did not released, in spite of many trials.
Then the canonical 8 CTD stations were performed as well as on Naide pltform.
There the acoustic releaser of the mooring reply.

The scientific crew was: Betti, Campanelli and Penna; Paschini was on board only in the second leg.

(IF APPLICABLE) if the cruise is designated as part of a larger scale cooperative projct (or expedition), then enter the name of the project and of organisation responsible for co-ordinanting the project.
PROJECT name : ENI Coordinanting body : CNR-ISMAR-AN

Enter the name and address of the Principal Investigators responsible for the data collected on the cruise and who may be contacted for further information about the data.
The letter assigned below against each PI is used on next tables, under the column heading 'PI', to identify the data sets for which he/she is responsible.
PRINCIPAL INVESTIGATORS
namebodyaddresscountrye-mail
AElio PaschiniCNR-ISMAR-AN Largo Fiera della Pesca,2 60125 AnconaITALYe.paschini@ismar.cnr.it
BMauro Marinias beforem.marini@ismar.cnr.it

This section should be used for reporting mooring, bottom mounted gear and drifting systems (both surface and deep) deployed and/or recovered during the cruise.
Separate entries should be made for each location (only deployement positions need be given for drifting systems). This section may also be used to report data collected at fixed locations which are returned to routinely in order to construct 'long time series'.
MOORINGS, BOTTOM MOUNTED GEAR AND DRIFTING SYSTEMS
PILatitudeLongitudeTYPEDESCRIPTION
- -- -- - --

Separate entries should be made for each distinct amd coherent set of measurements of samples. Different modes of data collection (e.g. vertical profiles as opposed to underway measurement) should be clearly distinguished,as shouldmeasurements/sampling techniques that imply distinctly different accuracy's or spatial/temporalresolution. Thus, for example, separate entries would be created for i) XBT drops, ii) water bottle stations, iii) CTD casts, iv) towed CTD, v) towed undulating CTD profiler, vi) surface water intake measurements, etc.
Each data set entry should start on a new line - it's description may extend over several lines if necessary.
SUMMARY OF MEASUREMENTS AND SAMPLES TAKEN
PINOUNITSTYPEDESCRIPTION
A2fileD90 cruise track Navigation program SeaClearII with GARMIN GPS 36
A28castsH10 SBE9/11+ (C, T, D), SBE43 (Oxy), TURNER SCUFA(Fl,Tur)
A28castsH09 Rosette GO1015 with 3 bottles of 10 litres YDRO-BIOS
B54samplesH21 Oxygen Winkler method
on board analysis with METROHM Tritino720 and sampler760
B109samplesH22, H24, H25, H76, H26 Phosphate, Nitrate, Nitrite, Ammonia, Silicate,
on shore analysis with Autoanalizer BRAN+LUEBBE model QuAAtro (2 Ch.)
B109samplesB02 Phytoplankton Pigments (Chlorophyl a, b, c)
on shore analysis with HPLC DIONEX model PDA100+GP50

You are strongly encouraged to submit, with the completed report, an annotated chart illustranting the route followed and the points where measurements were taken.
TRACK CHART : none

Enter the names of the oceans and/or seas in which data were collected during the cruise - please use commonly recognised names(see, for example, international Hydrography Bureau Special Publication No. 23, Limits of Oceans and Seas').
GENERAL OCEAN AREA(S) : Eastern Mediterranean Sea (179 Marsden Square)

if the cruise activities were concentrated in a specific area(s) of an ocean or sea, then enter a desciption of the area(s). Such desciption may include references to local geographic areas, to sea floor features, or to geographic coordinates.
SPECIFIC AREAS : North Adriatic Sea