CRUISE Name : ADRICOSM-06 No : --

---

CRUISE PERIOD start : 20 april 2006 to end : 26 april 2006
PORT OF DEPARTURE Ancona (ITALY)
PORT OF RETURN Ancona (ITALY)

enter the full name and international radio call sign of the ship from which the data were collected, and indicate the type of ship, for example: research ship, ship of opportunity, naval survey, etc.
SHIP Name : DALLAPORTA Call Sign : IYVQ Type of ship : trawl research vessel (35 m.)

enter name and address of the laboratory responsible for coordinanting the scientific planning of the cruise
RESPONSIBLE LABORATORY Name : CNR-ISMAR-AN Address : Largo Fiera della Pesca, 2 Ancona, 60125 Country : ITALY

enter name and address of the person(s) in charge of the scientific work (chief of mission) during the cruise
CHIEF SCIENTIST(S) Name : Mauro Marini CNR-ISMAR-AN

enter sufficient information about the purpose and nature of the cruise so as to provide the context in which the report data were collected
OBJECTIVES AND BRIEF NARRATIVE OF CRUISE
Second cruise of project ADRICOSM. Also ENI and NRL project have operations in this cruise.
The scientific work started with the monitoring of "Clara Est" platform(8 CTD and 32 samples),
then transect Brindisi-Durazzo (16 CTD and 87 samples ) was done.
The ship entered in Durres harbour to bring on board albanian and montenegro scientific crew:
Bledar Murtaj, Elvin Como, Arian Çopani from Albania
Zoran Kljajic, Vesna Macic from Montenegro
Aleksandar Jovicic from Montenegro was on board in a little stop in Bar harbour during the cruise.
Completed the 5 transect of Drin Gulf (30 CTD and 141 samples),
the ship entered in Bar harbour in order to deploy foreing crew.
On april 24th the transect Vieste- Split, NRL project (11 CTD and 60 samples) was done and
on 26th the monitoring of "Naide" platform (8CTD and 32 samples).
All the casts were limited to 210 meters depth, due to the sea cable length.

The italian scientific crew was: Marini, Penna and Caccamo.

(IF APPLICABLE) if the cruise is designated as part of a larger scale cooperative projct (or expedition), then enter the name of the project and of organisation responsible for co-ordinanting the project.
PROJECT name : ADRICOSM-ext Coordinanting body : INGV-Bologna

Enter the name and address of the Principal Investigators responsible for the data collected on the cruise and who may be contacted for further information about the data.
The letter assigned below against each PI is used on next tables, under the column heading 'PI', to identify the data sets for which he/she is responsible.
PRINCIPAL INVESTIGATORS

	name	body	address	country	e-mail
A	Elio Paschini	CNR-ISMAR-AN	Largo Fiera della Pesca,2 60125 Ancona	ITALY	e.paschini@ismar.cnr.it
B	Mauro Marini	as before			m.marini@ismar.cnr.it
C	Zoran Kljajic	IBM-Kotor	Dobrota bb, 85330, Kotor	MONTENEGRO	zkljajic@ibmk.org
D	Mitat Sanxhaku	AL_HIM	Duressi, 219 Tirana	ALBANIA	-e-mail-

This section should be used for reporting mooring, bottom mounted gear and drifting systems (both surface and deep) deployed and/or recovered during the cruise.
Separate entries should be made for each location (only deployement positions need be given for drifting systems). This section may also be used to report data collected at fixed locations which are returned to routinely in order to construct 'long time series'.
MOORINGS, BOTTOM MOUNTED GEAR AND DRIFTING SYSTEMS

PI	Latitude	Longitude	TYPE	DESCRIPTION
-	-	-	-	---------

Separate entries should be made for each distinct amd coherent set of measurements of samples. Different modes of data collection (e.g. vertical profiles as opposed to underway measurement) should be clearly distinguished,as shouldmeasurements/sampling techniques that imply distinctly different accuracy's or spatial/temporalresolution. Thus, for example, separate entries would be created for i) XBT drops, ii) water bottle stations, iii) CTD casts, iv) towed CTD, v) towed undulating CTD profiler, vi) surface water intake measurements, etc.
Each data set entry should start on a new line - it's description may extend over several lines if necessary.
SUMMARY OF MEASUREMENTS AND SAMPLES TAKEN

PI	NO	UNITS	TYPE	DESCRIPTION
A	7	file	D90	cruise track Navigation program SeaClearII with GARMIN GPS 36
A	73	cast	H10	SBE911+ (C, T, D ), SBE43 (Oxy), TURNER SCUFA(Fl,Tur)
A	73	cast	H09	Rosette GO 1015 with 6 bottles of 10 litres
B	33	sample	H21	Oxygen Winkler method on board analysis with METROHM Tritino 720 and sampler 760
B	352	sample	H22, H24, H25, H76, H26,	Phosphate, Nitrate,Nitrite,Ammonia, Silicate on shore analysis with Autoanalizer BRAN+LUEBBE model QuAAtro (2 Ch.)
B	28	sample	B02	Phytoplankton Pigments (Chlorophyl a, b, c) on shore analysis with HPLC DIONEX model PDA100+GP50
C	3	sample	P02	Trace heavy metal on shore analysis

You are strongly encouraged to submit, with the completed report, an annotated chart illustranting the route followed and the points where measurements were taken.
TRACK CHART : ADRIA06.png

Enter the names of the oceans and/or seas in which data were collected during the cruise - please use commonly recognised names(see, for example, international Hydrography Bureau Special Publication No. 23, iLimits of Oceans and Seas').
GENERAL OCEAN AREA(S) : Eastern Mediterranean Sea (179 Marsden Square)

if the cruise activities were concentrated in a specific area(s) of an ocean or sea, then enter a desciption of the area(s). Such desciption may include references to local geographic areas, to sea floor features, or to geographic coordinates.
SPECIFIC AREAS : North Adriatic Sea