CRUISE Name : ACS1 No : GDP07-??

---

CRUISE PERIOD start : 19 november 2007 to end : 23 november 2007
PORT OF DEPARTURE Ancona (Italy)
PORT OF RETURN Durres (Albania)

enter the full name and international radio call sign of the ship from which the data were collected, and indicate the type of ship, for example: research ship, ship of opportunity, naval survey, etc.
SHIP Name : DALLAPORTA Call Sign : IYVQ Type of ship : trawl research vessel (35 m.)

enter name and address of the laboratory responsible for coordinanting the scientific planning of the cruise
RESPONSIBLE LABORATORY Name : CNR-ISMAR-AN Address : Largo Fiera della Pesca, 2 Ancona, 60125 Country : ITALY

enter name and address of the person(s) in charge of the scientific work (chief of mission) during the cruise
CHIEF SCIENTIST(S) Name : Paschini Elio CNR-ISMAR-AN

enter sufficient information about the purpose and nature of the cruise so as to provide the context in which the report data were collected
OBJECTIVES AND BRIEF NARRATIVE OF CRUISE
First seasonal (autumn) monitoring cruise of ADRICOSM-STAR Project

The ship departed at 19:00 of monday 19 november. A CTD cast was made in deepest point of Jabuka Pit during the sail.
Dallaporta arrived, 25 hours late, in Zelenika, where all the foreign staff went on board.
From Montenegro: Klajic, Macic and Jovicic.
From Albania: Como, Xhanari and Mocka.
Then the ship steams inside Boka Kotorcska to make CTD cast and box-corer in every bacin (KO,TV and HN stations).
From exit to open sea, on the 21 november, the transect 1, 2 and 3 were made.
On 22 november 4 stations of transect 7 were done before to finish the transect 4.
Then in the morning the ship enter in Bar harbour to deploy Jovicic.
At evening of 22 november all the work was done and the ship dropped the anchor in front of Durres.
At 10:00 of 23 we entered into the harbour.

Water samples for Oxygen Winkler analisys on board.
The italian scientific crew was: Betti, Caccamo,Paschini and Penna.
Paschini and Penna, helped by Macic and Klajic, performed the CTD, rosette and box-corer operations.
Caccamo and Betti, helped by Como, Xhanari and Macic performed the sample and filtration operations

(IF APPLICABLE) if the cruise is designated as part of a larger scale cooperative projct (or expedition), then enter the name of the project and of organisation responsible for co-ordinanting the project.
PROJECT name : ADRICOSM-STAR Coordinanting body : CMCC viale Gallipoli, 49 Lecce 73100 ITALY

Enter the name and address of the Principal Investigators responsible for the data collected on the cruise and who may be contacted for further information about the data.
The letter assigned below against each PI is used on next tables, under the column heading 'PI', to identify the data sets for which he/she is responsible.
PRINCIPAL INVESTIGATORS

	name	body	address	country	e-mail
A	Elio Paschini	CNR-ISMAR-AN	Largo Fiera della Pesca,2 Ancona 60125	ITALY	e.paschini@ismar.cnr.it
B	Mauro Marini	as above			m.marini@ismar.cnr.it
C	Zoran Klajic	IBMK	Dobrota bb, POB 85330 Kotor	MONTENEGRO	biokotor@cg.yu
D	Mitat Sanxhaku	HI-A	Street of Durresi, 219 Tirana	ALBANIA	mitats@yahoo.com

This section should be used for reporting mooring, bottom mounted gear and drifting systems (both surface and deep) deployed and/or recovered during the cruise.
Separate entries should be made for each location (only deployement positions need be given for drifting systems). This section may also be used to report data collected at fixed locations which are returned to routinely in order to construct 'long time series'.
MOORINGS, BOTTOM MOUNTED GEAR AND DRIFTING SYSTEMS

PI	Latitude	Longitude	TYPE	DESCRIPTION
-	-	-	-	----

Separate entries should be made for each distinct amd coherent set of measurements of samples. Different modes of data collection (e.g. vertical profiles as opposed to underway measurement) should be clearly distinguished,as shouldmeasurements/sampling techniques that imply distinctly different accuracy's or spatial/temporalresolution. Thus, for example, separate entries would be created for i) XBT drops, ii) water bottle stations, iii) CTD casts, iv) towed CTD, v) towed undulating CTD profiler, vi) surface water intake measurements, etc.
Each data set entry should start on a new line - it's description may extend over several lines if necessary.
SUMMARY OF MEASUREMENTS AND SAMPLES TAKEN

PI	NO	UNITS	TYPE	DESCRIPTION
A	2	file	D90	cruise track Navigation program SeaClearII with GARMIN GPS 36
A	54	casts	H10	SBE911plus (C, T, D) with SBE43 (Oxy), TURNER SCUFA(Fl,Tur), BENTHOS 916(Alt)
A	53	casts	H09	Rosette GO1015 (the eldest) with 7 bottles of 1.7 litres General Oceanics
B	73	samples	H21	Oxygen Winkler method on board analysis with METROHM Tritino720 and sampler760
B	213	samples	H22, H24, H25, H76, H26	Phosphate, Nitrate, Nitrite, Ammonia, Silicate, on shore analysis with Autoanalizer BRAN+LUEBBE model QuAAtro (2 Ch.)
B	40	samples	B02	Phytoplankton Pigments (Chlorophyl a, b, c) on shore analysis with HPLC DIONEX model PDA100+GP50
A	12	samples	G02	Box Corer (25x15x30 cm)
B	12	hydrocarbons and pesticides	P90	on shore analysis with HPLC DIONEX model PDA100+GP50
C	12	trace metals in sediment	P02	on shore AAS analysis
D	12	granulometric analysis	G90	on shore analysis
D	12	organic matter	B90	on shore analysis

You are strongly encouraged to submit, with the completed report, an annotated chart illustranting the route followed and the points where measurements were taken.
TRACK CHART : ACS1.svg

Enter the names of the oceans and/or seas in which data were collected during the cruise - please use commonly recognised names(see, for example, international Hydrography Bureau Special Publication No. 23, Limits of Oceans and Seas').
GENERAL OCEAN AREA(S) : Eastern Mediterranean Sea (179 Marsden Square)

if the cruise activities were concentrated in a specific area(s) of an ocean or sea, then enter a desciption of the area(s). Such desciption may include references to local geographic areas, to sea floor features, or to geographic coordinates.
SPECIFIC AREAS : South Adriatic Sea