CRUISE SUMMARY REPORT

CRUISE Name : ENI08-5 No : GDP08-??
CRUISE PERIOD start : 15 october 2008 to end : 16 october 2008
PORT OF DEPARTURE Ancona (ITALY)
PORT OF RETURN Ancona (ITALY)
enter the full name and international radio call sign of the ship from which the data were collected, and indicate the type of ship, for example: research ship, ship of opportunity, naval survey, etc.
SHIP Name : DALLAPORTA Call Sign : IYVQ Type of ship : trawl research vessel (35 m.)
enter name and address of the laboratory responsible for coordinanting the scientific planning of the cruise
RESPONSIBLE LABORATORY Name : CNR-ISMAR-AN
Address : Largo Fiera della Pesca, 2 Ancona, 60125 Country : ITALY
enter name and address of the person(s) in charge of the scientific work (chief of mission) during the cruise
CHIEF SCIENTIST(S) Name : Elio Paschini CNR-ISMAR-AN
enter sufficient information about the purpose and nature of the cruise so as to provide the context in which the report data were collected
OBJECTIVES AND BRIEF NARRATIVE OF CRUISE
Fifth monitoring cruise (2008 year) of ENI methane extraction station TEA (8 CTD casts, 41 m depth). A box containing 12 temperature datalogger (of the FPD ISMAR Ancona group) were joned to 3,4 and 5 casts for calibration check.
During this cruise a training program of Ravenna Marine Ecology (UNIBO) was done as well as 4 CTD stations on the Senigallia transect for the LTER program.
A mooring recovery and a mooring launch was done close to TEA station.
Winkler analisys was not performed and only few samples for Fluorometer calibration were done, due to a reduced filtering capacity.
The check of NAIDE station mooring was seccessfull.

The scientific crew was: Elio Paschini, Pierluigi Penna, Alessandra Campanelli from ISMAR and
eigth students: Andrea Barogi, Alberto Beccari, Elia Bueloni, Federico Gaiti, Gloria Marchesi, Lucia Marziliano, Tullio Rossi and Stefano Tassinari
from Bologna University.
(IF APPLICABLE) if the cruise is designated as part of a larger scale cooperative projct (or expedition), then enter the name of the project and of organisation responsible for co-ordinanting the project.
PROJECT name : ENI Coordinanting body : CNR-ISMAR-AN
Enter the name and address of the Principal Investigators responsible for the data collected on the cruise and who may be contacted for further information about the data.
The letter assigned below against each PI is used on next tables, under the column heading 'PI', to identify the data sets for which he/she is responsible.
PRINCIPAL INVESTIGATORS
name body address country e-mail
A Elio Paschini CNR-ISMAR-AN Largo Fiera della Pesca,2 60125 Ancona ITALY e.paschini@ismar.cnr.it
B Mauro Marini as above m.marini@ismar.cnr.it
This section should be used for reporting mooring, bottom mounted gear and drifting systems (both surface and deep) deployed and/or recovered during the cruise.
Separate entries should be made for each location (only deployement positions need be given for drifting systems). This section may also be used to report data collected at fixed locations which are returned to routinely in order to construct 'long time series'.
MOORINGS, BOTTOM MOUNTED GEAR AND DRIFTING SYSTEMS
PI Latitude Longitude TYPE DESCRIPTION
A 44 30 13 01 D01 mooring recovered with AR s/n 710, SBE39 s/n 1684 (37), RCM7 s/n11196 (34m) and RCM7 s/n 11849 (13m)
A 44 30 13 01 D01 mooring launched with AR s/n 697, SBE39 s/n 1687 (36m), , RCM7 s/n 11327 (30m) and RCM9 s/n252 (24m)
Separate entries should be made for each distinct amd coherent set of measurements of samples. Different modes of data collection (e.g. vertical profiles as opposed to underway measurement) should be clearly distinguished,as shouldmeasurements/sampling techniques that imply distinctly different accuracy's or spatial/temporalresolution. Thus, for example, separate entries would be created for i) XBT drops, ii) water bottle stations, iii) CTD casts, iv) towed CTD, v) towed undulating CTD profiler, vi) surface water intake measurements, etc.
Each data set entry should start on a new line - it's description may extend over several lines if necessary.
SUMMARY OF MEASUREMENTS AND SAMPLES TAKEN
PI NO UNITS TYPE DESCRIPTION
A 2 file(s) D90 cruise track Navigation program SeaClearII with GARMIN GPS 36
A 12 cast(s) H10 SBE9/11+ (C, T, D), SBE43 (Oxy), TURNER SCUFA(Fl,Tur)
A 12 cast(s) H09 "Carousel" SBE32 with 3 bottles of 10 litres YDRO-BIOS
B 44 samples H22, H24, H25, H76, H26 Phosphate, Nitrate, Nitrite, Ammonia, Silicate,
on shore analysis with Autoanalizer BRAN+LUEBBE model QuAAtro (2 Ch.)
B 8 samples B02 Phytoplankton Pigments (Chlorophyl a, b, c)
on shore analysis with HPLC DIONEX model PDA100+GP50
A 2 file(s) D01 Aanderaa RCM7 s/n 11849 currentometer from 7/july/08 at 30 min.
A 2 file(s) D01 Aanderaa RCM7 s/n 11196 currentometer from 7/july/08 at 30 min.
A 1 file(s) D01 SBE39 s/n 1684 temperature recorder from 7/july/08 at 10 min.
You are strongly encouraged to submit, with the completed report, an annotated chart illustranting the route followed and the points where measurements were taken.
TRACK CHART : none
Enter the names of the oceans and/or seas in which data were collected during the cruise - please use commonly recognised names(see, for example, international Hydrography Bureau Special Publication No. 23, Limits of Oceans and Seas').
GENERAL OCEAN AREA(S) : Eastern Mediterranean Sea (179 Marsden Square)
if the cruise activities were concentrated in a specific area(s) of an ocean or sea, then enter a desciption of the area(s). Such desciption may include references to local geographic areas, to sea floor features, or to geographic coordinates.
SPECIFIC AREAS : North Adriatic Sea